Completely ready to feel the jump in sound top quality that only an amplifier can provide you? JVC’s drvn DR Series KS-DR3004 car amplifier can easily drive each of your front and rear audio speakers with 60 watts RMS, providing your music power and clearness. Just starting a system? You can use this durable and trustworthy amplifier to run your front speakers with its front channels, then bridge the backside channels mutually to power a subwoofer with up to 180 watts RMS. Soon after on, you can power your rear audio speakers with the KS-DR3004 when you get a subwoofer amplifier.
KS-DR3004 flexible options
The JVC KS-DR3004 car amplifier arrives with the controls you need to have to get music sounding perfect in your car. You will find separate low- and high-pass filters for the front side and rear channels at your disposal, letting you to customize the amplifier to driving full-range audio speakers or subs. And speaker-level inputs allow you to connect this amplifier to nearly any car stereo, possibly even a factory audio system.
Constant power supply is guaranteed many thanks to a large-size toroidal transformer in the JVC KS-DR3004 amplifier. Its high rotating density and low flux leakage enhances conversion process performance of the power. The final result is all-natural and impressive music playback all through the volume level range. Photo: JVC
JVC KS-DR3004 4-channel Power Amplifier highlights:
- 4-channel car amplifier
- 60 watts RMS x 4 at 4 ohms (90 watts RMS x 4 at 2 ohms)
- 180 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
- CTA-2006 compliant
- Class AB amp technology
- switchable high-pass (150 Hz) and low-pass (80 Hz) filters on front and rear channels
JVC KS-DR3004 car amplifier specs:
- Maximum Power Output
- 800W
- RMS Power Output (4 ohm) [ 1% THD 14.4V]
- 60W x 4 (20 – 20,000Hz)
- RMS Power Output (2 ohm) [ 1% THD 14.4V]
- 90W x 4 (20 – 20,000Hz)
- RMS Power Output (Bridged 4 ohm) [ 1% THD 14.4V]
- 180W x 2 (1,000Hz)
- Class
- Class-AB
- Frequency Response (+0, -3dB)
- 5 – 50,000Hz
- Total Hamonic Distortion
- < 0.04%
- Signal-to-Noise Ratio (reference: 1W into 4 ohms), CEA-2006 Compliant
- > 80dB
- HPF
- 120Hz (12dB)
- LPF
- 80Hz (12dB)
- RCA Input
- AL/AR, BL/BR
- High Level Input (Speaker Level Input)
- Yes
- High Level Input Auto Power Control (Signal Sensing Turn On)
- Yes
- Input Sensitivity
- 0.2 – 15V
- Protection Circuitry (Thermal / Short Circuit / Overload / DC Offset)
- Yes
- Anti-Pop Circuit
- Yes
- Dimensions (W x H x D)
- 322 x 52 x 185