Sony XM-GS6DSP – Powerful all-system 6-channel car amplifier (780W RMS -1500W max)

Sony XM-GS6DSP – 6-channel car amplifier Flexible all-system amplifier
Tired with the way your songs sounds in your car or truck? Sony’s XM-GS6DSP 6-channel amplifier can help to make your audio system sound superb, delivering 45 watts RMS to each of the front and rear audio speakers, while sending up to 600 watts RMS to a sub. This amplifier can additionally use its onboard crossover and bandpass filter systems to power an dynamic 3-way system, driving a pair of tweeters with 45 watts each, 2 mid-range drivers with 45 watts each, as well as a couple of low-frequency woofers with 90 watts each. Sony’s Class D amp technology guarantees high power output from a little machine case that can fit nearly anyplace in your car, while built-in signal processing will allow you to fine-tune the sound to match in too.

Customized tuning through the application
Using Sony’s Music Center app on your Bluetooth® device, you can fine-tune your system’s time alignment, 10-band EQUALIZER, balance, speaker levels, and fader right until it sounds ideal. Bluetooth streaming enables you to play music straight to the amp, which is wonderful news if your receiver does not have that function.Sony XM-GS6DSP

Connections and controls
You will locate all the connections on one side of the amplifier, which makes cabling easier and neater. The tuning controls sit recessed underneath the tough aluminum cover so they will not get accidentally moved. The separate controls for the front, rear, and subwoofer channels are placed out nicely on the control panel – uncomplicated to notice, user-friendly to use. A adjustable bass boost allows you add some low-end punch to the sound whenever you want it. Speaker-level inputs allows this amplifier to do the job in the majority of systems.
High quality electrolytic capacitors at power input and output stages deliver responsive bass. Premium inductors with very low level of resistance OFC wire cut RF noise for a unique, dynamic sound.Sony XM GS6DSP Sony XM GS6DSP 1 1Very customisable low and high pass filter systems can be used all over the system, letting you to drive component high frequency tweeters and subwoofers, plus everything in between, all from the same amp.
Supercharge the sound of your current car stereo system without changing the look of your dashboard. The Sony XM-GS6DSP turns in-car sound with up to 780W of power. Photo: SONY

Sony XM-GS6DSP 6-channel car amplifier specs & features:

6-channel car amplifier with digital signal processing
tweeter/front and mid/rear channels:
45 watts RMS x 4 at 4 ohms
woofer/subwoofer channel:
90 watts RMS x 2 at 4 ohms (175 watts RMS x 2 at 2 ohms)
350 watts RMS x 1 bridged at 4 ohms (600 watts RMS x 1 bridged at 2 ohms)
CTA-2006 compliant
Class D amp technology
12 dB/Octave Crossovers:
tweeter/front: variable high-pass filter (500-4000 Hz)
mid/rear: variable low-pass filter (50-500 Hz), bandpass adds variable low-pass filter (500-4000 Hz)Sony XM-GS6DSPwoofer/subwoofer: variable low-pass filter (50-500 Hz), variable bass boost (0-10 dB)
Digital Functions:
digital signal processing control via Sony Music Center app on your Bluetooth device
controls include 10-band EQ, time alignment, speaker level, fade
Bluetooth streaming from your compatible device
pre-amp and speaker-level inputs
fuse rating: 30A x 2
wiring and hardware not included with amplifier
8-gauge power and ground leads recommended
dimensions: 11-5/8″W x 2-3/16″H x 7-7/8″D
Warranty: 3 years

Playing a BLUETOOTH Device:
You can play contents on a connected BLUETOOTH device that works with BLUETOOTH A2DP (Advanced Audio Distribution Profile).
(Available only when the SELECT switch is set to the “2V” or “SV” position.)
To play the BLUETOOTH device, installing the “Sony 1 Music Center” application to your iPhone/Android smartphone is required.
Download the newest version of “Sony 1 Music Center” application from the App Store for iPhone
or from Google Play for Android smartphone.
1. Operate the BLUETOOTH device to make the BLUETOOTH connection with this unit
2. Launch the “Sony 1 Music Center” app.
3. Start up your audio playback application on the BLUETOOTH device.
4. Run the BLUETOOTH device to begin playback.

CTA2006 Standard
Power Output: 45 Watts RMS x 4 at 4
Ohms, 90 Watts RMS x 2 at 4 Ohms< 1%
SN Ratio: 83 dBA (FRONT /REAR), 80 dBA
(SUB) (reference: 1 Watt into 4 Ohms)
Wireless Communication
Communication System:
BLUETOOTH Standard version 3.0
Output: BLUETOOTH Standard Power Class 2
(Max. Conducted +1 dBm)
Maximum communication range: Line of sight approx. 10 m (33ft)
Frequency band: 2.4 GHz band (2.4000 GHz- 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles: A2DP (Advanced Audio Distribution Profile) 1.3
AVRCP (Audio Video Remote Control Profile) 1.5
SPP (Serial Port Profile)
Corresponding codec: SBC (.sbc), AAC (.m4a)

You might also like
Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More