TP-Link Deco Full home Wi-Fi system – product review
The Deco M5 is TP-Link’s take on the growing favorite whole home Wi-Fi product section.These small discs have a complete of 4 radios each one, that work as a mixture of Wi-Fi backhaul and customer access. One set of 2.4GHz and 5GHz radios communicate to your laptops, mobile phones, tablets or whatever other Wi-Fi gadgets you have.
The other set of 2.4Ghz and 5GHz radios talk to other TP-Link Deco base stations – this is known as backhaul.Using this separate backhaul radio,Wi-Fi range can be expanded with little decrease of speed. Spread the access points around your home and they will instantly talk to each other, all with a single network name so your wi-fi devices will automatically latch on to the strongest access point.Because the access points can be positioned closer to
where your devices are, overall performance really should improve as your tablet, for instance, isn’t battling to reach an access point far away, but is using one nearby.
Set up TP-Link’s Deco application on your smartphone,take the units out of the box and connect one into the Ethernet socket on your modem or NBN network termination device (NTD).Start up the Deco app on your smartphone, make a TPLink account, the application then detects the access point over Bluetooth and suggests you to create a network name and password.This is it. You are up and working with the first access point.
To install more access points all-around your home, simply plug them in to a power outlet, start the application on your smartphone again and tell it you want to create a new access point. It’ll do the Bluetooth syncing stuff again and boom,you’ve extended your Wi-Fi network. Do that for as many access points you like.The toughest part of the procedure is choosing where to place the access points. Positioning makes a large
difference as to the performance of the network. Place the access points too close together and your devices are even now too far away from the signal. Place them too far aside, the backhaul link will be poor and speeds will not be much better than talking to the main access point directly.
TP-Link Deco M5 – Connect and Protect Every Device
Every TP-Link Deco M5 access point has a Gigabit Ethernet socket, so if you are in a position to run Ethernet to an area, you can increase the mesh network with a rock-solid connection back to your primary access point. You don’t even need to set up anything – just simply plug the Ethernet cable in and off you go.
TP-Link Deco M5 SPECIFICATIONS:
$199 (single); $399 (3-pack) –
Quad-core CPU -wireless: 400 Mbps on 2.4 GHz + 867 Mbps
on 5 GHz – Four internal antennas per Deco unit -2 Gigabit
ports for each Deco unit-Antivirus:Protects every device from cyber threats.
Control of the devices happens all through the Deco application. There is no web user interface like standard Wi-Fi routers,which has advantages and disadvantages. The on-boarding and setup procedure for the Deco M5 couldn’t get any more straight forward if TP-Link tried and controlling the gadgets is a piece of cake.There is a lot of Wi-Fi fine mesh systems on the market nowadays and if you’re searching for advanced functions and state of the art functionality, search somewhere else. But if you just want no nonsense, total home Wi-Fi that even the most techno-phobic person can get operating, the TP-Link Deco is ideal.
Comments are closed.