You want to install SSD to improve the speed of your laptop because it uses up a lot of storage space and is slow. It’s a really smart approach. It might appear easy to install an SSD in your laptop, but it’s not. You might run into some tricky issues, like system migration.
It’s simple to choose an SSD that works with your laptop because all you need to do is write down the model of your computer or the type of hard drive interface, which can be found in your computer’s handbook. It’s also not difficult to install the SSD because all you have to do is stick to the directions, which call for turning off the laptop, taking apart its back cover, and installing the SSD.
The most difficult part is system migration, which typically implies having to reinstall Windows and any other necessary software on the new SSD. Making a Windows installation disc, for example, or backing up your data are just a few of the procedures needed to perform a clean reinstall. The entire procedure, especially the backup and installation, is highly time-consuming. You will experience data loss if you don’t have a reliable backup strategy.
Is it possible to add an SSD to your laptop without having to reinstall Windows OS? True is the response. A powerful Windows copying application like iSumsoft Cloner greatly aids in the solution of this issue. It enables direct Windows OS copying or transfer to the SSD without erasing data and keeps the SSD bootable. It avoids the hassle of having to reinstall Windows and preserves all of your data. Here are some precise details.
A great disk cloning program for Windows PCs is iSumsoft Cloner, which can copy or clone the Windows operating system, data partitions, and even complete hard drives. It allows you to swiftly upgrade or replace your computer’s hard drive without having to reinstall Windows or risk losing data. It also makes Windows migration and data backup quicker and more effective.
-Ensure that the SSD is connected to the laptop
Install the SSD inside the laptop if your laptop allows you to install two hard drives simultaneously. Otherwise, you must externally connect the SSD to the laptop using a USB-to-SATA converter and an external hard drive enclosure.
-Log into Windows after turning on the laptop. Ensure that the SSD is shown as a partition. Before using the new SSD, you might need to initialize it by opening Disk Management.
Directly Copy the Windows OS to the SSD
On the laptop, download and install iSumsoft Cloner. Launch the software once it has been installed.
To begin transferring the Windows OS to the SSD, select the Copy option on the left side, choose your current system disk (generally drive C:) as the source target, choose the SSD drive as the destination target, and then click Start.
Just wait until the copying is complete. Depending on the amount of operating system drive space used, this typically takes about ten minutes. Your Windows OS has successfully been cloned to the recently installed SSD when the software displays a “Mission Completed” prompt.
From the SSD, start up your laptop
The SSD can now be set as the first boot device in your laptop’s BIOS utility so that it boots from it when you restart it. The SSD should be installed inside the laptop this time if it was previously attached to the computer externally. Your Windows OS will then operate smoothly and properly.
By doing this, you may keep all of your data without having to deal with the inconvenience of reinstalling Windows. If you intend to replace the hard drive in your pc, it will be useful.
